SpacrGrid is an installer friendly, modular DC (direct current) power distribution system, specifically designed to reduce power consumption by an average of 20% for LED lighting, HVAC motors, and other DC or digital devices, without increasing project capital costs.
LED Lights can only work on DC power. Every LED fixture requires a driver that converts AC into DC, typically wasting about 20% of the electricity converted in the form of heat. Save your lighting projects up-front cost and energy by utilizing a DC power distributions system. Comes standard with 0-100% dimming, daylight harvesting, and occupancy sensing.
Many HVAC motors and actuators can only work on DC power. Just as with LED lights, every one of these requires a driver that converts AC into DC, typically wasting about 20% of the electricity converted in the form of heat. Save your HVAC projects up-front cost and energy by utilizing a DC power distributions system. Comes standard with speed controls and smart sensing.
Many other building systems are also based on DC technology and are compatible with SpacrGrid. Just to name a few: electrified door strikes (keyless entry systems), motorized roller shades, USB power outlets, PoE (Power over Ethernet) and other network systems, most actuators and solenoids, controlled valves and dampers, and renewable energy systems (solar and battery storage).
Just like a typical electrical distribution panel, SpacrPanel distributes power to the electrical loads in a building. The difference is that SpacrPanel converts to DC at the panel to take advantage of a singe, extremely high efficiency power conversion. SpacrPanel is modular and can be configured to distribute power at any voltage from 12-750 Volts DC.
The SpacrGrid is made up of a network of intelligent DC load controllers called SpacrNodes. These nodes are connected to the SpacrPanel and can be daisy chained to avoid home runs of cable back to the power source. The Nodes automatically detect the type of load they are connected to (i.e. LED light or DC motor), and the load's electrical operating point (i.e. voltage and current).
The SpacrSwitch is a long-life, wireless, programmable switch for lighting or any other connected load that needs remote control. It's compact and fits behind a standard decorator opening face-plate. It can sit flush on the wall, so that no recess needs to be made in the drywall (no cutting), and no wiring is required, saving on electrical labour and material costs.
44 Gerrard St. E,
739 D'Arcy St.,